Antique Iron Hardware
|
Wonderful craftsmanship. Measures 6”H x 10” overall length. Feet are 5” and countersunk bored for screw mounting. $150 |
|
18th Century Double Entry Door Hardware Set -4 Spearpoint strap hinges (20” length), takes 3/8” pintles $200 |
|
Vintage Horse or Animal Tether 5” x 5” x 7”H weighing 28 pounds. Ideal for small dog or other domestic animal. Portable. $55 |
|
Vintage POCKET DOOR Rolling Hardware and Pull/Lock Cast iron top-mounted rolling wheel pair in excellent condition. One set available. Retractable brass ring pull and lock bolt are also available from the door. The hardware is still in place and can be removed if required. Otherwise it will stay with the door. $125 for all the hardware |
|
Hand Wrought/Forged BUTTERFLY Hinge PAIR Excellent condition. Measurements as shown. $60 |
|
Hand Wrought/Forged BUTTERFLY Hinge PAIR Excellent condition. Measurements as shown. $75 |
|
|
The photos speak for themselves. 12” overall width x 8” overall height. Can be adapted to mount into stone or use as is designed. $130 |
|
Early Rat Tail Tipped Hinge PAIR 16” x 1-1/2” requiring a 1/2” pintle $65 pair |
|
18th Century Exterior SPADE Latch Hefty feel to this 10” overall latch in excellent condition. Central Connecticut origin. Lift handle has small curlicue detail. SOLD |
|
Period Hand Wrought EXTERIOR Latch Central Connecticut origin. 15” overall length x 2-3/4” cusp. $250 |
|
18th Century Twisted Braced Keeper Higher style than average with the twisted brace. Excellent condition. One available. $50 |
|
|
Four available, all in excellent condition $40 each |
|
Braced Keeper for TWO DOOR Set Up (LYM) RARE OFFERING in excellent condition. This is the keeper that would be installed on the passive door of a two door entry. The double braced construction is a testament to the skill of the blacksmith who created this work of art. Whether you intend to use it or simply collect there in none better. $225 |
|
18th Century Cast Iron Fireback-1765 From an early Central Connecticut dwelling. A dated artifact. Chalk has been utilized to enhance the casting features. Measures 21-1/2”W x 19”H. “Right as rain”. SOLD |
|
|
This artifact speaks for itself. 42”W x 36”H Double pinned hinge locations. Excellent condition. SOLD |
|
6” Cast Iron Butt/ Strap Hinges Excellent condition SOLD |
|
|
Wonderfully preserved example which is completely hand forged. 1/2” pintle pair to hang the gate is included. Spring latch, topped by a hand forged ball tip, is in solid, working condition. Gate measures 29” wide x 44” tall at the center spire. SOLD |
|
Vintage HORSESHOE Style Barn Door Rollers with Track Excellent condition pair of rollers measure 12” x 12” overall. Two matching track sections are 8’ length each. Rollers only: $150 pair |
|
1800’s Wooden Spoke Cart/Baby Buggy Wheels 14” diameter with iron rims. Very good condition. Many decorative uses. Set of three matching $50 |
|
Victorian Era One Piece Cast Iron Planter Excellent condition, measures 18”H , 20” diameter bowl. Base is 9” x 9”. SOLD |
|
Victorian Era Cast Iron Two Piece Planter Base measures 10” x 10”. The overall height when assembled is 27”. Bowl diameter is 15”. No cracks. SOLD |
|
Unique CAST IRON Portable Boot Scraper I’ve been told that this particular style was carried on stage coaches to allow passengers to clean their boots and shoes before climbing into the carriage. If not, it certainly would be practical in a domestic setting. Measures 8” x 8” x 7” tall. Excellent condition. It is quite hefty. $175 |
|
HIGH STYLE Hand Forged Boot Scraper In the many years that I’ve been handling good period hardware it is always a pleasure to acquire a period piece that was never installed. The blacksmith who created this was an artisan…….this is a masterpiece. Measures 17”H x 13-1/2” overall width. The square stock legs are 8-1/2” on center. I hesitated to offer this for sale………. $425 |
|
Wrought Iron Driveway Gates PAIR This high quality pair of gates will accommodate a 12’ wide opening. The gates are each 77” including the hinge and are 73”W without including the hinge. Each section is 52”H and requires a 1” diameter pintle to hang them. Two pipe style posts with the correct pintles are included. They each measure 3-1/2”D x 8’-0” long. $1,400 Pair |
|
Cast Iron Urn/Planter Cover (B) 16-1/2” outside diameter x 10-1/4”H. Excellent condition. One of two closely matching covers offered on this site. $125 |
|
Cast Iron Urn/Planter Cover (A) 16-1/2” outside diameter x 10-1/4”H. Excellent condition. One of two that are a very close match. $125 |
|
|
This was originally made to cover a cast iron planter or urn for the winter months. It can once again be just for that OR situated as a decorative garden item. The cover has an inside ridge which would fit on an urn/planter measuring 18-1/2” (inside diameter). The overall measurements are 19”W x 25”H. $175 |
|
Circa 1920’s Wrought Iron Railing PAIR Excellent construction and condition, featuring brass ball finials and curlicue railing tips as shown. Bolt-mounted to a wall or door jamb. The length of the sides are 38” workable, and 42” overall. The height (without bottom spacing) is 28”. $225 pair |
|
19th Century Cast Iron Hitching Post A perfectly preserved original artifact that has been in storage. Measures 58” overall length x 4” at the widest portion. When installed it can be adjusted to be 36” to 42” above grade. SOLD |
|
Circa 1800 Barn Door Strap Hinges -TWO PAIR Hard to source matching two pair set of SPEAR POINT tip hinges. Overall length is 39”, the working portion measures 36”L. Widest point is 2”. Requires 3/4” pintles. Excellent condition. $250/Two Pair |
|
19th Century Cast Iron Latch Bar and Keeper Large scale bar is 7/8” x 12-1/2”L. Cast iron keeper 1-1/4” x 4” $25 |
|
|
3-1/2” spike side x 3-3/4” overall height. Excellent condition. SOLD |
|
Unusual Cast Iron Corner Feed Box As you can see it has a compartmented interior. Measures 17-1/2” x 17-1/2” x 5-1/2” This is a vintage piece which has been painted black. $95 |
|
Architectural Cast Iron Hay Feeders PAIR 32” x 33” overall with high relief casting on the tines. Excellent condition. $175 pair |
|
|
A single example which is an interesting curiosity. 11” diameter. Complete. If you like rare and unusual then you just found it !! SOLD |
|
Cast Iron Tractor/Implement Seat Collection Forty seven pieces in all. This collection is offered as one lot only. Additional photos are available (inquire). Names include: Walter Wood, Morgan, Stoddard, Buckeye (several variations), Champion, Granite, Toronto, and Duane H. Nash (Millington, New Jersey) SOLD |
|
|
Great country appeal with bold graphics. Tub measures 20” x 20” x 32” height With the wringer in place it is 45” tall. Perfect working order. $125 |
|
|
Made by W.L. Daley Pump Corp. Rockford, Illinois Excellent condition, measures 44” tall $175 |
|
|
Post-mounted variety. In perfect working condition with its original clapper. Bell is 16” diameter. SOLD |
|
18th Century Hand Forged Boot Scraper Outstanding form and condition for its age. Measures 9”H x 12-1/2”W overall $125 |
|
Cast Iron TREE FORM Hitching Post Highly prized form, made by the N.E. Butts Company of Providence, Rhode Island. Measures 67” overall (as they would have been) with the above-grade portion measuring 42”. SOLD |
|
|
Wonderful eye appeal. Reinforcement band added at some early time. Three legged. Season crack, but sound. Hand forged bail handle. Measures 8”H x 11”Diameter. $45 |
|
|
Outstanding ornate form in excellent condition. Overall measurements are 6” x 10” SOLD |
|
Cast Iron Butt/Strap Hinges Pairs All in excellent working condition. Photos from top to bottom by listed sizes: |
|
Cast Iron Wellhouse Wheel/Pulley 14” W overall x 16”H overall. Excellent condition. $95 |
|
Victorian/Eastlake Cast Iron Shelf Brackets (H) Excellent condition, 6” x 8” $45 pair |
 |
Victorian/Eastlake Cast Iron Shelf Brackets (K) Matched pair in excellent condition. 6-1/2” x 8-1/2” $45 pair |
 |
|
Well executed twisted shafts terminating flattened and rolled tips. 9”W x 12”H overall. Can be mounted in wood or stone. SOLD |
 |
Vintage Hand Forged V/Strap Hinges Pair Excellent condition, virtually no wear. Measure 17” overall length. “V” portion is 7”H x 5”W. Old bolt hardware will remove. $85/Pair |
 |
|
Excellent original condition. Measures 2”W x 8”L with 2-1/2” hooks projection. $45 |
 |
Vintage Cast Iron Bar Style Slide Bolt 6” overall x 1-1/2”W. Excellent condition. $25 |
 |
Circa 1870’s VICTORIAN/EASTLAKE Cabinet Latches Patented 1873. These are two piece, lever style ….. the photo shows open and latched positions. Overall 2” wide and 3”H. Porcelain knobs. Excellent condition. $30 each |
 |
Bi-Directional Gate Latch Bar Lock/Receiver Vintage hand forged artifacts, made, but never used. Matching pair, each measures 3-1/2”W x 1-1/4”H x 4”L Can be mounted in stone or wood. $25 each |
 |
|
Perfect original condition. Measures 11-1/2”W x 6”H x 48”L Wonderful eye appeal. Ideal for seasonal planting or actual use. SOLD |
 |
Vintage MEYERS Copper-Bodied Pitch Pump Higher than usual styling, model #3182K, which has a ratcheting style top knuckle. Measures 20” H and retains its original decal. $95 |
 |
|
20” high. Base has slight damage which is barely noticeable. Priced accordingly. SOLD |
 |
Vintage Cast Iron CRESCENT Stove Salesman Sample Barn fresh. Measures 13”W x 12” H x 6” deep. Complete with no damages. Three miniature cooking items included. Stove pipe, often missing, is still intact. SOLD |
 |
|
Classic form, measures 14”H x 36”L $35 |
 |
Homemade/Make-Do Animal Tether Farm found, made from a scale weight, iron ring and molten poured lead. Measures 6” diameter x 1-3/4” thick, weighs 12 pounds. Great eye appeal. $45 |
 |
|
Solid, tight, virtually no wear. Other sizes available…..inquire. $65 |
 |
Hand Forged Period Butt/Strap Hinges PAIR 5-1/2” x 11-1/4”. Butt plate is 1-1/8” wide. These were on doors but they are oftentimes found on blanket chests. We have 3 matching pairs available presently. $65 pair |
 |
|
From a Circa 1840 Glastonbury, Connecticut barn foundation. These are intended to be mounted in a masonry joint. Unique stylized curled tips. Slight variation in size as shown. $90/pair |
 |
Period CAST IRON Butt Hinge PAIRS Large quantity from 1” to 3-1/2”. Smaller sizes are hard to source. Inquire on price for required size. $20 to $35 per pair |
 |
Circa 1830 Pewter Pull NORFOLK Latch Handles 18 available @ 7-1/2” $50 each, latch only |
 |
Circa 1830 Pewter Handle NORFOLK Latches Mid-shaft pewter bulb. Five matching that are 7-1/2” overall length and two matching that are 6-1/2” length. Excellent condition. $50 each |
 |
Vintage Cast Iron Butt/Strap Hinges PAIR -20” $65/pair |
 |
|
Vintage, measure 20”H x 18” overall $55 pair |
 |
Vintage NEW HAVEN Morise Latches 3/4”W x 3-1/2” overall length. All working condition. Four matching. $20/all |
 |
Twisted Shaft Hand Forged Hooks Attractive small scale with original mounting staples (which are hard to locate). 2”, 2-1/2” and 3” SOLD |
 |
Hand Forged Hinge Pintles PAIR Matched pair. 3/4” pin x 1-1/2”H x 10” overall. The threaded pintle is made that way to adjust swing. $50/Pair |
 |
|
19” overall height. Excellent condition. $65 |
 |
|
3” x 5” $25 |
 |
Hand Forged Beam Hooks (Pair)-B 3” tall x 1-1/2” hook portion $30/Pair |
 |
Hand Forged Beam Hooks (Pair) A Larger than average scale, both are 4” tall. One hook is 2-1/2” and the other is 2”. Remnant white paint authenticates installation. $30/Pair |
 |
|
20-1/2” overall length. 6” wide x 3” deep “hoop” section. Unusual spade style base mounting portion. SOLD |
 |
RARE Myers and Brothers Pitch Pump This early cast iron pump is seldom offered. The graphics are incredible and are on both sides of this excellent condition example. Overall height is 42”. If you are looking for a unique, stand-out artifact, then this is it ! SOLD |
 |
|
Retaining its original paint, this example is in excellent condition. 46” overall height. Pump handle moves freely. Made in Seneca Falls, New York $295 |
 |
Vintage Iron Horse Tether Block Pleasing form. Measures 6-1/2” x 6-1/2” x 10”H $75 |
 |
|
Overall height 8’-6”. 48” from the ground to the largest basin. Then 24” to the middle basin and then 16” to the top basin. Swan bird base motif. Excellent state of preservation. $3,400 |
 |
|
Well made and attractive artifact. Overall height is 33”. Base extreme width is 30”. Accepts a 1-3/4” pole. $45 |
 |
Vintage Cast Aluminum Plant Hangers Matched pair that are suitable for sidewall hanging. Overall measurements are 25”H x 21”W. Iron pot rings accept a 4” diameter pot. One bracket has cast iron pot rings and the other is aluminum. No cracks or beaks. $50/pair |
 |
|
35-1/2” diameter x 1-1/2”W x 1/2” thick. Ideal for a sign application or other imaginative use. Flat and in solid condition. SOLD |
 |
|
4” x 34” x 1/2” thick. Hanging hooks still in place. $25 |
 |
|
16” x 42” overall. Galvanized, in excellent condition. $40 |
 |
|
Straight are 19” overall length Angled are 12” x 12” legs 1/2” diameter stock $30 all |
 |
19th Century Hand Forged LONG STRAP Hinge Pair 44” and 46”, matching pair. 2” wide. Requires a 3/4” pintle. Bean tipped. $150/Pair |
 |
|
6” height. Fits a 3-3/4” post $25 |
 |
Vintage Cast Iron Arch Top Window/Venting Grate #1 One available. Measures 12-1/2” x 44” overall. Excellent condition. Basket weave pattern. SOLD |
 |
Vintage Cast Iron Window/Venting Grates Three matching. Measure 10” x 44”. Rimmed, with screw mounting holes for easy installation. Original frame still in place on one of them. $50 each |
 |
18th Century Hand Forged Strap Hinges Pair Exquisite condition. Bean tips, chamfered edges. Requires 3/4” pintles. Overall length is 45” $175 |
 |
Victorian Era Garden Wire Edging A RARE OFFERING of 38 “hoops” which measure 16” W x 18”H. They were originally installed as shown. An attractive treatment for that special spot. Five other close matching tines also included. $275/Lot |
 |
Vintage Heavy Duty Locking Hasp Nicely executed. Overall length 15”. Width 1-1/2. $20 |
 |
|
$25 |
 |
|
Hand forged, 12” lift points spread as shown. $20 |
 |
18th Century RUSH LIGHT Hardware This has great presence, but I believe it to be a reproduction. $25 |
 |
|
12” and 13” length $15 each |
 |
|
Set of four items as shown $50/set |
 |
18th Century Entry Door Locking Bar Hardware One set available--the unbroken one in photos. $75 |
 |
Period Hand Forged Locking Hasps Three to choose from as shown. Top to bottom: 14” overall, 12-1/2” overall and 10” overall. Complete sets with required staples as shown. Choice $40 each |
 |
Hand Forged LONG LENGTH Strap Hinges 18th or early 19th century in excellent condition. 1-3/4” x 38” overall. Bean tip. $150 pair |
 |
19th Century LONG LENGTH Strap Hinges 1-3/4” x 35” in excellent condition. Bean tips. 5/8” pintle. $150 pair |
 |
|
Authentic period. Measure 7” overall. Work well. $30 |
 |
Hand Forged RAT TAIL Lift Latch Bar 6” overall length $40 |
 |
18th and 19th Century Hand Forged Bean Latches Large selection of 7”-8” in very good to excellent condition. Keepers, latch bars and staples also available at $15 for each piece. Latch only, $45 |
 |
|
Beautiful blacksmithing. 6” x 16” overall. $45 |
 |
18th Century LARGE SCALE Exterior Door Latch Probably from a public building. Perfect condition, in the desirable spade cusp design. Cusp is 4” W. Latch overall length is 18-3/4” $250 |
 |
|
Outstanding craftsmanship in the execution of this perfect condition artifact. 8” x 14” overall with a 2-1/2” diameter ring. $65 |
 |
Vintage Wrought Iron Boot Scraper Floor mounted form with the highly desirable rams horn “ears”. Great eye appeal. Overall width 12” x 9”H. Mounts with four screws. $95 |
 |
Vintage Cast Iron Boot Scraper/Wall Hook Attractive wall-mounted variety boot scraper. This is usable also a wall hook. Measures 6” x 6” overall. $65 |
 |
Vintage Cast Iron Well House Wheel Measures 12” x 14” overall height in excellent condition. SOLD |
 |
Vintage Iron Corner Brace Rods Four matching high quality iron 3/4” diameter x 36” long. Original 7” bolts and square nuts are included. These would result in a eye catching finishing touch on your project. Set of four $160 |
 |
|
Used to alleviate sagging large scale doors as in a barn like these were used. These are stainless steel and measures 9’ minimum and 10’ maximum extension. Outstanding value at $50/pair |
 |
Vintage Large Scale Barrel Bolt Intended for surface/face mounting. Measures 10” overall with the original screws and receiver hardware. Ready to use. $25 |
 |
Circa 1915 Eastlake/Victorian Steel Locking Hardware Measures 2-1/2” x 9” with pull chains and the original mounting screws included. Mechanism works freely. Receiver hardware is not in hand. $60 each OR $100/pair |
 |
Circa 1900-1930 Galvanized Wash Tubs Highly sought after due to their practicality. The removable top makes the unit usable as a table/counter too. Measures 21” x 31” x 31”H. The two basins are 14” deep. Older green one coat overpainting as seen. $325 |
 |
Vintage MEDIUM SCALE Barn Door Rollers (#2382) Overall measure 8-1/2” wide x 11”H. Rollers are fully intact and operational. Vintage track is available at $10/ linear foot $150/Pair Shipping available at $25 |
 |
Vintage LARGE SCALE Barn Door Rollers (#2386) Overall measurements are 11” x 11”. Rollers fully intact and operational. Old bar red color still evident or will clean easily. $175/Pair Shipping available at $25 |
 |
Circa 1930’s Nickel Plated Closet Hook Unusual form. Measures 9” long. Original mounting screws included. $20 |
 |
Vintage Cast Iron Weathervane Directionals Excellent condition. Overall length is 11” x 2-1/2”H Fits on a 3/8” diameter shaft. These are not reproduction. $75/set |
|
|
This is an incredible find of 3/4”W x 1” link of 1/4” twist iron chain. This is the application that this was in but the chain length was never cut, allowing the user to customize the new application. 96 linear feet $275 |
|
|
Slotted circumference for a drive belt. Measures 19” diameter. $20 |
|
Vintage Garden Implement Wheels Matched pair of iron wheels with grip pads. Must have been on a piece of powered equipment. 14”W overall, wheel portion is 11” diameter. Country decorative item. $40/pair |
|
Vintage Cast Aluminum Pulleys Pair Most probably used in a clothesline application. Excellent condition. 6” diameter wheels. $45/pair
|
|
Hand Forged Spearpoint Strap Hinges (EB-F) 17-1/2” and 21-1/2” x 1-3/8” at the widest point $75/pair
|
|
Hand Forged Strap Hinges (EB-E) Plain, probably farm forge made. 17” and 14-1/2” lengths x 1-1/8” $45/pair
|
|
Hand Forged Strap Hinges (EB-D) These were probably made “on the farm” using old wagon wheel rim stock as they are sectioned/pieced together as evident by the forge welds. 21” x 1-1/4”. Simple style. $45/pair
|
|
Hand Forged Strap Hinges (EB-C) 18-1/2” x 1-1/2” $45/pair
|
|
Hand Forged Strap Hinges (EB-B) 19” x 1-1/2” $45/pair
|
|
Hand Forged Strap Hinges (EB-A) 17” x 1-1/4” $45/pair
|
|
|
Rhode Island origin. Measures 9’-9” L x 36”H Outstanding construction and eye appeal. Original hinge pin and latch bar are both intact. Heavy gauge rivets fasten the semicircular decorative brace. Spindles are pyramid topped as shown. Excellent condition. Rare offering. $975 |
|
Circa 1880 Cast Iron Fireplace Fender Simple elegance is the hallmark of this eye appealing fender. Measures 28-1/2” overall width x 12” depth (projection) x 7”H Will clean nicely, in excellent condition. $175
|
|
|
Circa 1880’s by T. Bent and Son New York. Model number 149 as shown. Two pieces including the summer cover. Overall height 33”, overall width 30” Excellent condition. $295
|
|
|
4-1/2” x 4-1/2” x 45” tall. Original fence intersection cut-out on one face as shown in the top collar molding. Solid condition. $75 |
|
|
4-1/2” x 4-1/2” x 37”H. Solid condition. One drilled hole as shown. $75 |
|
|
5-1/4” x 5-1/4” x 43” tall. Solid condition. No extraneous holes. $95 |
|
Vintage CAST IRON Matching Pair-Posts 4-1/2” x 4-1/2” x 42” tall. No cuts or holes. Solid condition. $195 Pair |
|
Vintage CAST IRON Corner Feed Box 14” x 14” corner in excellent condition with no cracks or damage. $75 |
|
Vintage Cast Iron Corner Feed Boxes Matching set of four takes a 16” x 16” corner. Excellent condition with no cracks or damage. $85 single choice OR $300 for all four |
|
|
From left to right, two measure 5” projection and two measure 7” projection. The one on the left is a highly unusual form. These were all in a stable area of an 1850’s barn in Montville, Connecticut. Sold as one lot. $60 |
|
Circa 1850 Cast Iron Bake Oven Door Professionally removed and fully intact and operational. Foundry was in Amherst, New Hampshire as indicated in the casting. Slide lever for draft had been previously cut, which is a simple fix. Measures 12” x 16” overall and would require a 10” x 14” rough opening. $295 |
|
Vintage Butt/Strap Hinges PAIR Single pair of diamond tipped hinges measure a generous 3”W x 36”L Butt hinge portion measures 2-1/4” x 7”. Well constructed with bronze bushings. Will clean up nicely. $125/pair |
|
Vintage Iron Barn Strap Hinges Two matching pair measuring 24”L x 1-3/4”W x 3/8” thick. Original bolts will be removed upon purchase. Requires 7/8” pintles, not included. Two pair $195 |
|
|
Matching set of two pair measuring 19”L x 1-3/4”W x 1/2” thick. Excellent serviceable condition. Requires 3/4” pintle, not included. Set of 4: $195 |
|
|
Unusual form in very good condition. Measures 32”H x 29” wide overall. Base plate measures 18”W x 12” depth. The top rail unplugs from the rods. It is currently being held together with wire which can be seen in the photos. $250 |
|
|
Unusual form and style as most are corner mounted. This can be repurposed for many ideas due to its configuration. Measures 12” x 18” x 8” basin height and 12” overall height including the wall flange. Meant to be mounted with screws. No cracks or imperfections. $245 |
|
Vintage SINGER Sewing Machine Base Complete, in solid condition. Ready for your custom table top. $95 |
|
Vintage Barn Strap Hinges PAIR 36” length x 1-3/8” with decorative tip as shown. Requires 5/8” pintle, not provided. $75/Pair
|
|
Vintage Cast Iron Butt/Strap Hinges PAIR Hard to find 20” strap hinges in excellent condition. Old barn red paint will clean. $85/Pair
|
|
Vintage Farm Implement Steel Wheel Great eye appeal and scale. Solid condition. Measures 2” wide x 36” diameter. $85 |
|
|
Wonderful Victorian/Eastlake cast iron measures square 26-3/4” x 26-3/4”. Removable round center portion is 22-1/2” diameter. Solid condition. $120 |
|
Vintage 8 Spoke Wheelbarrow Wheel 20” diameter x 1-3/4” wide SOLD
|
|
|
Wonderful eye appeal on this heavy yard roller with 42” long draw bar. The triple roller design inhibits tear up on sharp turns. Architectural appeal rollers are 24” W and 24” H. Weighs about 300 pounds and rolls freely. Interior weights also are free wheeling. $295 |
|
Vintage Iron Garden Sphere/Orb A contemporary creation utilizing two hand forged wagon wheel rims. One is 50” diameter and the other is 48” diameter allowing them to be attached as you see. $175 |
|
|
Fine complete example, circa 1900, made in Middletown, Connecticut Overall length is 38”, and height from countertop flange is 21”. We have set these up with flexible tubing and remote faucet handles paired with a stone sink for an absolutely gorgeous period look and function. $275 |
|
Cast Iron Base/Marble Top Stand The base is a vintage decorative water heater stand mated to a vintage round 14” diameter marble top. Wonderful plant or cocktail stand. 17”H SOLD |
|
18th Century 3” H Hand Forged Hinge Pair Hinges $100/Pair
|
|
|
20” diameter base x 12’ Length tapering to 8” at the top. Hollow interior to run electrical. Ideal for pergola construction. Excellent condition. $800 each or $3,500/set |
|
Circa 1920-1930 Cast Iron Street Light Tops Large scale, ornate. These sections measure 67” tall with a 72” sign/light arm. Hollow to accept wiring if necessary. Main pole portion is 5” diameter. Three available. $750 each |
|
Circa 1920-1930 Cast Iron Light Pole Bases Fluted design with great eye appeal. The above grade portion is 42”H. The buried portion is 36”. The base of the exposed portion is 12” diameter tapering to a 3-1/2” opening/aperture for a post. Five available. Ideal for a pergola base….or……… Set of five $1,750 or $600 each/choice. |
|
Vintage Highly Ornate Cast Iron Leg Set The wooden top shown measure 16” x 30”. The width can accommodate up to approximately 24”-30”wide without tipping. The length would be adjustable to approximately 5 feet. An optional marble top is shown which measures 22” x 42”. Leg set only: $275 Optional top, add $100 |
|
Heavy Brass Handrail Mounting Brackets Five pieces which each measure 2-1/2” x 5”. The angle is adjustable by a screw on the back side of each bracket/flange. Will accommodate 1-3/4” to 2” diameter railing. One center rail support is included in this grouping. $80/set |
|
Vintage Marble Top Sink Counter & Backsplash 22” Deep x 28-1/2”W x 1-1/4” thick. 11-1/2” sink hole for under mount basin. Basin is long gone but are available through plumbing suppliers. The backsplash is 9” high. $275 |
|
|
Fully free, dry, and functional example. Length of hemp rope included. Measures 17”W x 34”H $125
|
|
Vintage Barn Hay Trolley and Forks Manufactured by R.A. Hudson, Minneapolis, Minnesota Excellent condition, all parts move freely. Included is the “spider” style hay forks as shown. 50+ feet of original track is also available as shown. Trolley and forks only: $375 All track, add $175
|
|
Circa 1960 Galvanized Louver Vent Measures 14-1/2” x 14-1/2” overall and requires a 12-1/2” x 12-1/2” rough opening. Will clean up nicely. $35
|
|
Architectural Cast Iron Fence Post 52”H x 5-1/2” x 5-1/2”. Opposing side has intrusions from intersecting fencing. Presents very well. Very solid and heavy. The mounting base is 11” x 12” and has mounting holes as shown. $225
|
|
Circa 1820 Bean Strap Hinges Pair 14” and 15” x 1-1/4” wide with the original drive style pintels. $85
|
|
Circa 1960’s Full Body Copper Weathervane Bull motif with horns. Bull measures 18”H x 26”W. Fully intact directions. Cast iron base is not included unless requested. Overall height is 64”. Nice verdigris patina/eye appeal. SOLD
|
|
|
Complete with fully intact legs and lifting “ears”. Measures 8-1/2” tall x 15” diameter. The pot portion is 5” deep. $65
|
|
|
42” tall. Handle is free moving but the pump is for decorative use only. Original, unpainted surface. Great eye appeal. $210
|
|
|
Thermos Company of Norwich, Connecticut origin (see inventory tag in photos) This base measures 23” diameter base x 54” height. Pole can be made to telescope for additional height if required. This was probably a floor fan base. Wonderful eye appeal. $95
|
|
|
16 pounds with original strap section Measures 2-1/4” x 6-1/4” SOLD
|
|
Cast Iron Postal/Paymaster Window Grate Measures 28”W x 30”H overall Flanges are flat for easy installation. Great vintage appeal. $100
|
|
19th Century Cast Iron Hay Feeder Excellent condition, no crack, nice patina Measures 31”W x 30H $110
|
|
|
Excellent condition 10 pound horse weight or tether weight. This is believed to have been manufactured in Covert, New York. Measures 5” x 2-1/2”. $48
|
|
|
Each section measures 9’-6” L x 7’H. Solid construction which can be customized to a smaller width if desired. Simple design. SOLD
|
|
18th Century Hand Forged Spearpoint Tip Strap Hinge Pair (RI-B) Most probably from the main entrance door. Rhode Island origin. Typical two lengths at 29” and 32” x 1-1/2” tapering to 3/4”. One tip has solid season crack (see photos). Takes a 3/8” diameter pintle, not provided. $175/Pair
|
|
19th Century Hand Forged Strap Hinge Pair Beefy/stout construction. Measure 1-3/4” x 32” length. Takes a 3/4” pintle, not provided. $120/Pair
|
|
Vintage Starburst Tip Lightning Rods Matched pair in as expected/aged condition. Overall height 29”. Tips are nickel plated and have some plating loss. $150/Pair
|
|
24” Cast Iron Strap Hinges Pair (B-E) Solid reusable condition. No cracks or breaks. $85
|
|
20” Cast Iron Strap Hinges Pair (B-D) Solid reusable condition. Decorative tips. $75 |
|
12” Cast Iron Strap Hinges (B-A) Excellent condition, no breaks $55 |
|
|
Portable hitching block for horses but we’re also used to tether other small animals. Measures 8” diameter x 3” overall height. Weighs 20 pounds. Nice accent/decorative item or use it for your dog or cat ??? $60 |
|
19th Century Cast Iron Hay Feeder (B-F) Standard/simple cast form. Measures 30”H x 32”W No breaks or cracks. Eastern Connecticut origin. $100 |
|
Hand Forged Small Animal Yokes Springy steel mechanical locking. Uncommon country farm item. Large yoke in photo center measures 10”W x 16”. Smaller yokes generally measure 12” x 12” 10”W x 16”H $30 |
|
Circa 1850 Cast Iron Fireplace Stove Insert Perfect condition period piece. Side jambs are curved. Brass finials are original. Four major sections break down for easy transportation and installation. Measures 49-1/2” overall width, 39” overall height, top plate is 17”deep/wide. Firebox opening is 37”W x 33”H. Crane length is 26”. $650 |
|
Early Cast Iron Bake Oven Door RARE round top door with early form Federal Eagle casting. Measures 13-1/2”H x 23-1/4” overall. Door measures 13”H x 16”W. The body casting is very sturdy at 5/8” thick x 2-1-4”W. Very attractive eye appeal which would add great dimension to any use/installation. $950 |
|
Rare/Unusual Iron Boot Scraper Three legged form. Countersunk mounting holes for screw installation. Overall measurements are 7-1/2”L x 6-3/4”W x 3”H. Nice, smooth patina. $160 |
|
|
Six sections: 9’-4”, 10’-4”, 9’-10”, 9’-10”, 7’-4” and 5’-10”= 50 LFT Repair parts are included in this package, see photos. Fence sections are 36”H 30” between top and bottom rails. Lower rail is 1-1/8”x 1-1/8”. Top rail is 1/4” x 2”W SOLD |
|
Vintage Gate or Small Door Hinge Set Hinge portion is 1-1/4” x 9” L Original screw in style pintles included as shown. Takes three 1/4” carriage bolts. $55/set |
|
|
Tastefully constructed using two matching used horseshoes Measures 9” x 5” x 5-1/2”H $45.00 |
|
Circa 1880-1920 Norwich Connecticut Chimney Cleanout Door Documented maker operating in Norwich during the above dates SOLD |
|
Circa 1875 Garden/Walkway Gate Cast iron with no missing or broken parts. Measures: 33”H x 37”W Hinge accepts a 5/8” pintle. Great classic look ! $550.00 |
|
|
Original cast iron pitch pump converted to a lamp. Excellent execution, solid construction. Pump handle has been secured from movement. Color can be changed if required, currently in original green. Overall height 31”, pump portion is 18” H $145.00 |
|
|
Professionally removed and in excellent condition. Measures 18-1/2”W x 15-1/4”H overall. Bake oven door clear opening measures 10” x 13”. Operating draft control works freely. Overall depth of the unit is 12”. SOLD |
|
19th Century Iron MILLSTONE Drive Gear Survivor artifact in very good condition. This was the metal portion for the center of a millstone that drove the stone. This one is tapered from 8” to 10” and is 9” tall. $125.00 |
|
|
Hard to find size. 28-1/2” x 28-1/2” x 1-1/4” Very solid construction, in excellent condition $85.00 |
|
Victorian Era Iron Garden Gate Exceptional quality and condition. Gate body measures 41”W X 60” overall height. Long pin style hinge is in excellent condition. The hinge flange adds 2-3/4” to the overall gate width. Latching hardware is still in working order.
|
 |
|
Hard to find 1-1/4” x 1-1/4” in excellent condition. $25—-Free shipping
|
 |
|
A.Y. McDonald Mfg. Co. Dubuque, Iowa visible in the casting. The pump has been cleaned and primed/painted with rust inhibiting paint. This pump is non-working and is suitable for decorative purposes only. $225
|
 |
|
Industrial pipe flange 4” diameter base. Unique CONNECTICUT stone, very smooth surface. Overall height 10”. Beautiful and unique decorator item. $45.00
|
 |
Industrial/Agricultural/Geological Folk Art SUNFLOWER Repurposed agricultural implement cultivator iron wheel 20” diameter. Mounted on 1-1/2” x 1-1/2” steel post (5’ length)with pointed tip to drive into the ground.Year round ability to have color in your favorite spot. |
 |
12” Cast Iron Barn Strap Hinges Minor chip at hinge pin, fully functional |
 |
|
16” x 16” x 10” H Minor season crack on front edge- see photos |
 |
NORWICH, CONNECTICUT Cast Iron Hay Feeder Recently discovered is this perfect example of documented maker Alfred H. Vaughn Foundry Co. 32” x 32” corner feeder. This foundry operated on Ferry Street from the 1880’s to approximately 1930’s. See photos including one of the actual foundry. |
 |
Circa 1930 Cast Iron Gas Station Sign Pole Base Measures 23”H x 21” Diameter base, excellent condition. The pole diameter would need to be 5” diameter. Base only available. |
 |
Circa 1890 Cast Iron Horse Stall Divider Circa 1890 Cast Iron Horse Stall Divider Hard to find item in very good condition. One season crack in casting perimeter which is barely noticeable. Measures 26-1/2” W x 82” H. Could be installed vertically or horizontally. |
 |
RARE FORM Victorian Marble Vanity Sink Measures 32” overall width x 20” overall depth with a 12” diameter bowl opening. Original ceramic bowl is included. Wonderful decorative sides attached to a 12” high backsplash. Great vintage condition. |
 |
19th Century Cast Iron Hitching Post In a remarkable state of preservation having been recently removed from its original location. Measures 6’ long x 5” diameter with a securing flange at the base. Excellent all original condition. |
 |
19th Century Forged Strap Hinges Matching pair in a simple form. 22” long x 1-1/2” wide requiring a 1/2” pintle. |
 |
19th Century Barn Strap Hinges Heavy duty hand forged in a unique, very attractive form. Hinge pintle pin is designed to be removed if necessary. Overall length is 36” x 12” high. Pintles are 9” long with threaded ends. Excellent condition. Eastern Connecticut origin. |
 |
16” Cast Iron Barn Strap Hinges Excellent condition |
 |
30” Cast Iron Barn Strap Hinges Excellent condition in a very hard to find size. |
 |
|
Made by J.S. White in Pawtucket, Rhode Island. These were on a circa 1900 store front. One has an added decorative portion at the top, but if removed, would yield two matching 104” Length columns. The bases measure 8-1/2” x 9-3/4” |
 |
Cast Iron Industrial Beam Mounting Plate 14-3/4” x 11-3/4” x 1” with a 8-1/2” x 9-1/2” pocket. Can be used in a top or bottom application or as a decorative element. |
 |
Cast Iron Industrial Beam Mounting Plate 14-3/4” x 11-3/4” x 1” with a 8-1/2” x 9-1/2” pocket. Can be used in a top or bottom application or as a decorative element. |
|
Vintage Cast Iron Venting Grate/Portal (#2) This is one of two matching offered. This one has a fixed grate (Not movable) Measures 14-1/2” x 27”. The frame is 2-1/2” wide with the sill portion being 4” wide. There is a frame crack which will not affect its use. |
 |
Vintage Cast Iron Venting Grate/Portal (Movable-#1) This is one of two matching offered. This one has a movable grate/sash section. Overall measurements are 14-1/2” x 27”. The frame is 2-1/2” with the sill portion being 4” wide. |
 |
Vintage Cast Iron Fireplace Surround Nicely executed. Measures 33”H x 33-1/4”W Has mounting flanges on reverse side. This would work well in an outdoor barbecue setting for a wood box surround/facing. Use your imagination !!
|
 |
Vintage Round Bar Stock Corner Hay Feeder Overall measures 30” x 30” , great look. $45.00 |
 |
Circa 1900 Cast Iron Corner Feeder Box Chipped flange as shown. Takes a 15” corner $60.00 |
 |
Circa 1900 Cast Iron Corner Feeder Box 17” corner with an old season crack in the front as shown. Will clean up nicely to be fully serviceable. $60.00 |
 |
Circa 1900 Cast Iron Corner Bowl Style Feeder Hard to find without cracks or damage. This is a perfect example. Measures 17” from inside corner and 10” deep $150.00 |
 |
|
37” x 37”, aged condition in good reusable condition $60.00 |
 |
19th Century Large Scale H Hinges Hard to find 10”. No barrel wear. ONE available pair. $125.00/pair |
 |
Vintage Hand Forged Butterfly Hinge 3” H x 3-1/4” wide when fully open. Excellent condition. $115.00 |
 |
Hand Forged Rams Horn/Strap Hinges Hand Forged Rams Horn/Strap Hinges Pennsylvania origin. Excellent condition. Measure 20-1/2” overall. Flange portion is 3” x 5-1/2” H . Strap is 17-1/2” L x 1-3/4” at widest tapering to 1/2” just prior to the spear point tips.
|
 |
Norfolk Style Door Latches and Parts We have a large inventory of these Circa 1820-1840 Interior and some Exterior door latches. We also have the latch bars (some with the knob pulls),latch bar keepers, and door jamb side screw in type latch bar keepers. We also have some with the pewter pull handle portion. Latches typically $45-65, back parts $15-$25 each |
 |
|
Early fireplace utensil was cast into a limestone based cement mixture. Base measures 5-1/2” x 5-1/2” x 4” high and it is 18” tall overall Nice vintage look for a utilitarian item. $45.00 |
 |
19th Century Whaling Ship Dead-Eye From an old ship building site in Parrsboro, Nova Scotia that built primarily whaling ships Incredible marine artifact measures 42” overall length Lignum Vitae deadeye measures 9” diameter x 6” thick $275.00 |
 |
Lift-Off Style Barn Door Strap Hinges Matching pair in excellent usable condition $150.00/Pair
|
 |
|
Roller portion measures 18” Diameter x 24” L Overall length is 52” Nice garden or yard ornament
|
 |
|
7-1/2"L x 2"W, nice patina $20.00 |
 |
|
Heavy duty feel, measures 12-1/2"L x 1-1/2" cusp Countersunk for screws $75.00 |
 |
|
High quality reproduction circa 1960's 2" x 7"H $40.00 |
 |
Victorian Style Drawer/Cabinet Pull Wooden knob, 1-1/4" projection X 1" W $10.00 |
 |
Period Brass Cabinet /Drawer Pull Plain style measures 1-3/8" x 1" projection knob, screw portion 1/2" L $10.00 |
 |
Mission Style /Crude Country Latch Hand forged, measures 2-3/4"W x 9-3/4"H x 2-1/2" projection Heavy/beefy scale $55.00 |
 |
Eastlake/Norfolk Style Door Knocker Cast Iron with original hand forged nuts Will take up to a 2" thick door, original surface will clean if desired Circa 1870-1880 $75.00 |
 |
Cast Iron Horse Hitching Post Cap Designed to cap a wooden post, usually a turned post like a porch Post Will cap a 4-1/2" diameter post. Measures 5"W x 6"H $55.00 |
 |
Vintage Cast Iron Door Knocker Small Scale measures 2" wide x 5" H Mounts simply with two screws $30.00 |
 |
18th and 19th Century Fireplace Cranes Large selection as partially shown Come see our inventory We have the gudgeons to mount the cranes into masonry too $75-$250 price range |
 |
Hand Wrought Barn Strap Hinges 22" L x 2-3/8" x 3/8" thick Matching original pintle, two matching pair $150.00/set |
 |
18th Century Interior Strap Hinges Diminutive slender style for either a cupboard or interior door 15" L and 11-1/2"L x 7/8" wide with a pleasing spear point $85.00/Pair |
 |
18th Century Interior Door Strap Hinges Spear tip measure 13" L x 1-1/8" W Early rolled end for pintle $60.00 Pair |
 |
Vintage Cast Iron Wall Light Fixture Needs re-wiring, all screws turn freely Base measures 4-3/4" x 9" with a 8" projection Takes up to a 3-1/4" globe glass $35.00 |
 |
|
2-1/2" and 3" sizes available Not cleaned but fully operational $20.00 per pair |
 |
Circa 1900 Cast Iron Store Front Columns Corner Columns measure 8'-8" overall length $750/pair |
 |
|
Top escutcheon missing $175 |
 |
|
Collectible and usable $20.00
|
 |
|
Collectible and usable $20.00
|
 |
18th Century Barn Strap Hinges Perfect usable condition. Measure 33" overall x 2-1/2" Excellent workmanship. $145.00 Free shipping
|
 |
|
Assembled set in good working order. SOLD
|
 |
|
28-1/2" x 28-1/2" in excellent condition Great for installation in a deck to clean shoes,etc $75.00
|
 |
Horseshoe Style Small Door or Chest Hinge Pair 19th century forged/wrought in excellent condition Heavy duty about 3/16" thick. Matching pair measure 8 x 10" each overall Divided in 6" section and 4" section (hinge not centered) SOLD
|
 |
18th C Barn Hitching Rail Hardware Two hand forged spike style hitching rail hardware/irons. These were hammered into a wall and accepted a horizontal wooden rail which measured 2-1/2" x 4"H. The length of the rail is adjustable for your needs. Matching pair $120.00 |
 |
|
From a 19th century New England mill Perfect condition measures 3-1/2" x 10" diameter Nice garden decorative element or wall hanging $45.00 |
 |
Early 20th century Cultivator Wheel 1-1/4" x 24" diameter Nice wall hanging or garden accent $25.00 |
 |
19th Century Industrial Hook and Loop- Small Scale Heavy gauge measures 2-1/4"W x 14" overall length (including loop) x 5/8" thick $35.00 |
 |
|
Used in an industrial setting at the top of a wooden post/column at the underside of a horizontal supporting beam. Probably 19th century. Nice decorative molded perimeter. 8" diameter x 1" thick $45.00/pair |
 |
Early Cast Iron Farmhouse Sink 20" x 40" x 6-1/2" deep Raw cast iron as found in rural dwellings Nice surface minor pitting will oil nicely $225.00 |
 |
|
Raw cast iron not extremely pitted as found in rural dwellings oftentimes set up with a copper or cast iron hand pump. This example measures 21-1/2" x 41" x 5" deep. $225.00 |
 |
Early Kitchen Copper Water Pump
|
 |
HL HINGES |
 |
